23
M 300 S
11/2010 - 300003201-001 - F
Setting the burner - M 302 S
Adjust size
6
with the adjustment screw
1
.
The position of the head on the adjustment is read by using a quick setting
2
or by measuring size
6
for finer adjustment.
Assemble the manometer in fuel pump .
Assemble the vacuometro in fuel pump .
!
Adjust cam ST0 = 0°.
"
Change cams ST1 and ST2 to obtain the required power.
#
The MV cam must always be located between the ST1 and ST2 cams (5° below ST2).
$
Start the burner.
%
Check the pressure in the head (Stage2). Check the combustion and the stability of the flame.
&
Set the pump pressure (Stage2).
'
Adjust cam ST2 in terms of the CO
2
value.
(
Move the servomotor backwards and forwards to restart the position of the cam ST2.
)
Check the pressure in the head (Stage1). Check the combustion and the stability of the flame.
*
Set the pump pressure (Stage1).
+
Adjust cam ST1 in terms of the CO
2
value.
,
Move the servomotor backwards and forwards to restart the position of the cam ST1.
-
Measure the combustion.
.
Check the burner start up and the (1
Æ
2 ; 2
Æ
1) speed passagesAdjust cam MV (If necessary).
/
Refer to the settings in the table "Check Table" in the user manual.
