16
11/2010 - 300003201-001- F
M 300 S
2 Burner location
Unscrew the 3 screws
1
.
Remove flame tube. Tighten screw
2
.
Push the burner towards the back through the furnace door.
Assemble the flame pipe onto the intermediate pipe.
!
Push the burner into the fire box so that the flame moves past the interior insulation of the fire box door by 160 mm (For M 302-6 S only).
"
Press the burner into the hearth door so that the turbulator exceeds the 10-15 mm insulation inside the hearth door (M 301 S - M 302-
1 S - M 302-2 S - M 302-3 S - M 302-4 S - M 302-5 S).
#
Fill in the resulting gap between the intermediate tube and the fire box door with insulating, fireproof material.
$
Untighten screw
2
.
%
Tighten the sliding clamp screws.
3 Maintenance
Disconnect the electrical connection connectors.
Unscrew the 5 rapid action screws.
Extract the parts plate from the housing.
Position the component holder plate on the studs on the casing.
Avoid any mechanical force on the turbine. Do not use the turbine as a support point in order to stop it from turning.
