5 Installer instructions
5.1
Changing installer parameters
The parameters in the Installer Menu must only be changed by a qualified
professional. Code
must be entered in order to change the pa
rameters.
Important
First, select a device, control PCB or zone to view or amend a set
ting.
Caution
Modification of the factory settings may impair operation of the de
vice, control PCB or zone.
1. Navigate to the Installer menu.
2. Press the
key to open the menu.
3. Keep pressing the key until the code
is displayed.
4. Press the
key to confirm opening the menu.
5. Keep pressing the key until the required device, control PCB or
zone is displayed.
6. Press the
key to confirm the selection.
7. Keep pressing the or key until the required parameter is dis
played.
8. Press the
key to confirm the selection.
9. Press the or key to modify the value.
10. Press the
key to confirm the value.
Fig.52
Step 2
MW-3000312-01
Fig.53
Step 3
MW-3000313-01
Fig.54
Step 4
MW-3000314-01
Fig.55
Step 5
MW-3000406-02
Fig.56
Step 6
MW-3000407-01
Fig.57
Step 7
MW-3000315-01
Fig.58
Step 8
MW-3000336-01
Fig.59
Step 9
MW-3000337-01
Fig.60
Step 10
MW-3000338-01
5 Installer instructions
16
7667004 - v.01 - 12072017
