4. Press the
key to confirm the value.
5. Press the
h
key to go back to the main display.
Important
The flow temperature is matched automatically when using a:
weather-dependent regulator
OpenTherm regulator
4.4
Changing the DHW temperature
The temperature of the domestic hot water can be changed as needed.
1. Press the
key to select the domestic flow temperature.
2. Press the or key for the required DHW temperature.
3. Press the
key to confirm the value.
4.5
Setting the Timer Program
If a timed thermostat is not being used, the timer program for the appli
ance can be used. The Timer Program can be used to lower the heating
temperature during the night or an absence during the day. A start and
end time for the lower temperature can be set in the Timer Program.
Note
Activate the timer program using the parameter:
The timer program can be set for each zone (heating, domestic
hot water or cooling).
1. Navigate to the Counter menu.
2. Press the
key to open the menu.
3. Keep pressing the key until the required zone is displayed.
4. Press the
key to confirm the selection.
The icons dedicated to the days of the week all flash at the same
time:
.
Fig.30
Step 4
MW-3000369-01
Fig.31
Step 5
MW-3000370-01
Fig.32
Step 1
MW-3000371-01
Fig.33
Step 2
MW-3000368-01
Fig.34
Step 3
MW-3000369-01
Fig.35
Step 2
MW-3000320-01
Fig.36
Step 3
MW-3000404-01
Fig.37
Step 4
MW-3000405-01
4 User instructions
12
7667004 - v.01 - 12072017
