7
EN
2 / DESCRIPTION OF YOUR APPLIANCE
• CONTROL PANEL (SOME MODELS ONLY)
On/ Off :
Press this button to start up the dishwasher.
Selection buttons :
For choosing the programme (see page 20).
For enabling multi-function product
adjustment (see page 21).
Set, Delayed end
:
Changing the settings (see page 10 and 11).
Adjusting the programme end time
(see page 20).
Programme selected indicator
:
High brightness : this indicates the
programme has been selected.
Display :
This shows the current time, the programme
end time, the remaining programme time and
the setting adjustments.
Pilot lights :
Salt :
On: indicates the salt compartment is empty
or almost empty.
Rinse aid :
On: indicates the rinse aid compartment
is empty or almost empty.
Multi-function products :
On: this indicates the “4/1” function is
activated (see page 9 and 11). The
programmes are automatically adapted to
multi-function products.
START :
Press this button to start up the programme.
In case of error, hold down this button for a
few seconds to cancel a selection or a
programme that is already running.
G
G
F
F
E
E
D
D
C
C
B
B
A
A
Observations :
A short beep confirms the button has been pressed (except the “On/Off” button).
For
power saving purposes
, this dishwasher automatically goes onto
standby
if it has not been
activated for a certain period (except in time delay mode).
All the pilot lights will switch off except the
“START”
button light and the light for the programme
in progress, which will flash.
To exit standby mode, simply press the “
START
” button. The dishwasher will then go into its
previous status.
-------------------------------------------------------------- or --------------------------------------------------------------
F
F
Fig. 02a
A
A
E
E
C
C
G
G
B
B
D
D
