DeDietrich DTI1008X, Manual To Installation And Use

Page: 22 / 68

EN
9
2 / USING YOUR APPLIANCE
•Delayed cooking
This function allows you to delay your cooking
(available only for the S
TART CONTROL
zone).
Program delayed cooking in 6 steps:
1 - Select the cooking zone dedicated to this
function.
2 - Press simultaneously on touchpads I “ + ”
and “ – ” to adjust the current time of your
hob. When the numbers flash, you can
adjust the hour with the touchpad I , then
wait a few moments. If the hour displayed
is correct, wait a few moments. The display
will stop flashing and a beep will confirm
the setting.
3 - Set the end of cooking time by pressing on
touchpad I . Wait a few moments. A beep
will confirm your setting.
4 - Set the duration of cooking time by press-
ing on touchpad I . Wait a few moments. A
beep will confirm your setting.
5 - Set the power of your cooking by pressing
on touchpad E, 4 is displayed by default
(maximum 6). Wait a few moments. A beep
will confirm your setting and SC is dis-
played on your hob.
6 - After a few moments, SC goes out and a
flashing point appears to indicate that
delayed cooking has been engaged.
•Independent timer
This function allows you to time an event, with-
out cooking.
- Select a cooking zone you are not using.
- Set the time with touchpad I . A “ t ” flashes in
the display.
- At the end of your adjustment “ t ” becomes
becomes fixed and the count begins.
Note:
You can stop a count in progress by keeping
your finger on the touchpad of the selection
on the display.
•Elapsed time
This function displays the time elapsed since
the last power setting adjustment on a cho-
sen zone.
To use this function, press the J J button. The
elapsed time flashes on the timer display of
the selected zone.
If you want cooking to end in a specific peri-
od, press button J J then, in 5 seconds, press
“+” on the timer to increase the cooking time
that you wish to set. The time display
becomes steady for 3 seconds then the
remaining time is displayed. There is a beep to
confirm your choice.
This function exists with or without the timer
function.
Note: If a time is displayed on the timer, this
time cannot be changed during the 5 seconds
after pressing the J J button. Once these 5 sec-
onds have elapsed, you may change your
cooking time.
G
H I J K
B
A
C
D
E
F