15
•
2
USE
Pairing the sensor with the hob
Pairing takes place only once when
using the sensor for the first time or when
replacing it.
The hob must be off.
1 - Press the on / off button on the back
of the sensor for 3 seconds; the sensor
gives off a blue flash and then flashes
green
2 - Hold down
;
is
displayed and the sensor flashes green.
3 - Give a short press on ; the hob gives
a confirmation beep;
flashes to confirm the pairing. The
sensor flashes blue (this step may take
up to 15 seconds).
the sensor is not designed to go
in an oven
.
Positioning of the sensor
There are 3 recommended positions:
-
Vertical
- Intermediate (adjustable)
- Slanted
It is not recommended to use the sensor
in its stand.
Using the sensor
To operate the sensor, you need
to switch it on (press the button for
several seconds); switch on the hob
and then select a burner. When setting
the temperature, the hob automatically
adjusts the necessary power which may
cause a difference in boiling.
Thermometer function
This function shows on the hob display
the temperature measured by the sensor
(range 5° - 180°C).
This function provides temperature
information.
This function can be used to measure
the temperature of a dish being cooked
on the hob or of a roast taken out of the
oven, for example.
If there is no cookware, the temperature
and “°C” flash on the burner's display.
