DeDietrich DPI7688XS, User Manual

Page: 29 / 180

10
•
2
USE
2.6 HORIZONE / DUOZONE
/
The free zone is selected with touchkey
(2.6.1) . The power and timer are
adjusted as for a normal cooking zone.
To switch the zone off, press and hold
key , a long beep sounds and the
displays go off or the "H" symbol
appears.
Pressing the touchkey in front of or
behind the zone deactivates the
function and transfers the settings to
the selected zone.
2.7 SETTING THE TIMER
Each cooking zone has a dedicated
timer. It can be used as soon as the
cooking zone is turned on.
To switch it on or change it, press the
timer touchkey (2.7.1) , and then
the
+
or
-
(2.7.2) or use the
numeric keypad (2.7.3) .
In this case you can enter the figures
for the desired time directly, one after
the other.
Pressing the «0» key switches off the
timer.
To make setting a very long time easier,
you can go straight to 99 minutes by
pressing the
– touchkey.
At the end of cooking, the display
indicates 0 and a warning beep
sounds. To cancel this information,
press any button for the particular
cooking zone being used. Otherwise,
they will switch off after a few seconds.
To stop the timer during cooking, press
the
+ and - keys at the same time or
return to 0 using the - key or enter "0"
on the numeric keypad.
h
g
o
Horizone
tech
Duozone
d
d
Independent timer
This function allows you to time an event,
without cooking.
- Select a cooking zone you are not using
(2.7.4).
- Press the .
- Set the time with touchpad . A “t”
flashes in the display (2.7.5).
- At the end of your adjustment “t” be-
comes becomes fixed and the count be-
gins.
Note:
You can stop a count in progress by
keeping your finger on the touchpad of
the selection on the display.
2.8 ELAPSED TIME key
This function displays the time since
the power setting was last changed for
a selected cooking zone.To use this
function, press the . The elapsed
time flashes in the selected zone's
timer display
(2.8.1) .
If you want cooking to end within a
specific time, press the key and
then, within 5 seconds, press + on the
timer to increase the desired cooking
time. The elapsed time is displayed
fixed for 3 seconds and then the
remaining time is displayed. A beep
sounds to confirm your choice.
This function is available with or
without the timer function.
Note: if the timer is showing a time, it is
not possible to change it within 5
seconds of pressing . After 5
seconds, the cooking time can be
changed.
i
i
i
h
g