appears.
Pressing the touchkey in front of or
behind the zone deactivates the
function and transfers the settings to
the selected zone.
2.7 SETTING THE TIMER
Each cooking zone has a dedicated
timer. It can be used as soon as the
cooking zone is turned on.
To switch it on or change it, press the
timer touchkey
(2.7.1)
, and then
the
+
or
-
(2.7.2)
or use the
numeric keypad
(2.7.3)
.
In this case you can enter the figures
for the desired time directly, one after
the other.
Pressing the «0» key switches off the
timer.
To make setting a very long time easier,
you can go straight to 99 minutes by
pressing the
–
touchkey.
At the end of cooking, the display
indicates 0 and a warning beep
sounds. To cancel this information,
press any button for the particular
cooking zone being used. Otherwise,
they will switch off after a few seconds.
To stop the timer during cooking, press
the
+
and
-
keys at the same time or
return to 0 using the
-
key or enter "0"
on the numeric keypad.
Independent timer
This function allows you to time an event,
without cooking.
- Select a cooking zone you are not using
(2.7.4).
- Press the
.
h
g
o
h
•
2
USE
26
case you can enter the number
corresponding the desired power
setting directly
(2.5.2)
. Pressing the
«0» key switches the hob off.
When switching on, you can go directly
to maximum power (apart from boost)
by pressing the
"–"
key for the zone.e .
Power presets
There are four
keys available that
provide direct access to pre-set power
levels:
= power 2 - Keep warm
= power 10 - Simmer
= power 19 - Sear
BOOST = maximum power
(2.5.3)
These power values can be modified,
except for BOOST.
Proceed as follows:
The hob must be switched off.
- Press and hold
or
or
to select it.
- Set the new power setting by pressing
on the
+
or
-
button.
- A beep will confirm your action after a
few moments.
Note: Power levels must be between
1 and 3 for
4 and 11 for
12 and 19 for
2.6 HORIZONE
The free zone is selected with touchkey
(2.6.1)
. The power and timer are
adjusted as for a normal cooking zone.
To switch the zone off, press and hold
key
, a long beep sounds and the
displays go off or the "H" symbol
f
Horizone
tech
d
d
