3. Carry out one of the following operations:
Tab.15
Menu
Description
Set Date and Time
Setting the date and time
Select Country and Language Select the country and language.
Daylight Saving Time
Setting the automatic change to daylight saving time. These changes will be carried out on the
last Sunday in March and October
Installer Details
Display the installer details
Set Heating Activity Names
Modify the name of activities used to program heating periods
Set Cooling Activity Names
Modify the name of activities used to program cooling periods
Set Screen Brightness
Setting the screen brightness
Set click sound
Switch the sound of the rotary knob on or off
Firmware Update
Display the software version
License Information
Display the creation licenses for the internal software
5.6
Personalising the zones
5.6.1
Definition of the term "zone"
Term given to the different hydraulic circuits (CIRCA, CIRCB). It indicates
several rooms served by the same circuit.
Tab.16 Example:
Key
Zone
Factory-set name
1
Zone 1
CIRCA
2
Zone 2
CIRCB
5.6.2
Changing the name and symbol of a zone
The name and symbol for a zone are factory-set as shown in the
appendix. If you desire, you can personalise the name and symbol of the
zones in your installation.
1. Select the icon for the zone to be modified,
, for example.
2. Select Zone configuration > Zone friendly Name.
3. Modify the name of the zone (20 characters max.).
4. Select Icon display zone
5. Select the symbol to be associated with the zone.
6. Enter the chosen name and symbol in the table provided at the back
of the manual.
5.7
Personalising the activities
5.7.1
Activity
This term is used when programming time ranges. It refers to the client's
desired comfort level for different activities during the course of the day.
One set point temperature is associated to each activity. The last activity
of the day remains valid until the first activity of the following day.
Fig.6
1
MW-1001145-2
2
Off
5 Operation
7682822 - v03 - 27082018
MIV-4S V200
21
