2. Set the following parameters:
Tab.14
Parameter
Description
Start date holiday
Set the date and time for the start of the absence period.
End date holiday
Set the date and time for the end of the absence period.
Wished room temperature during holiday
Set the desired room temperature for the absence period
Reset
Restart or cancel the holiday programme
4.5
Regional and ergonomic parameters
You can personalise your appliance by modifying the parameters linked to
your geographic location and the ergonomics of the control panel.
1. Press the key.
2. Select System Settings.
3. Carry out one of the following operations:
Tab.15
Menu
Description
Set Date and Time
Setting the date and time
Select Country and Language Select the country and language.
Daylight Saving Time
Setting the automatic change to daylight saving time. These changes will be carried out on the
last Sunday in March and October
Installer Details
Display the installer details
Cost calculation
Enter the tariffs for the energy used
Set Heating Activity Names
Modify the name of activities used to program heating periods
Set Cooling Activity Names
Modify the name of activities used to program cooling periods
Set Screen Brightness
Setting the screen brightness
Set click sound
Switch the sound of the rotary knob on or off
Firmware Update
Function not available
License Information
Display the creation licenses for the internal software
4.6
Personalising the zones
4.6.1
Definition of the term "zone"
Term given to the different hydraulic circuits (CIRCA, CIRCB). It indicates
several rooms served by the same circuit.
Tab.16 Example:
Key
Zone
Factory-set name
1
Zone 1
CIRCA
2
Zone 2
CIRCB
4.6.2
Changing the name and symbol of a zone
The name and symbol for a zone are factory-set as shown in the
appendix. If you desire, you can personalise the name and symbol of the
zones in your installation.
On
Fig.6
1
MW-1001145-2
2
4 Operation
20
AWHP MIV-S
7685690 - v04 - 06042020
