Dedicated Micros smartvu, Installation Manual

Page: 33 / 43

IP Address An IP address can be manually allocated to the unit.
Sub Net A Subnet address of the unit network can be manually allocated.
Gateway This is the IP address of the default gateway (router).
Primary DNS This is the primary DNS server IP address for applications utilising domain names.
DHCP If DHCP is being utilised, the assigned IP address will be displayed here.
Note: If no IP address is manually configured, DHCP will automatically assign one. The unit interrogates the
network for a DHCP server, which assigns an available IP address. This IP address can change every time
the unit is powered up. If DNS is not available, it is recommended that DHCP be disabled by entering a
suitable, free, static IP address.
Tip : Use DHCP to locate a free IP address, then fix the unit IP address to the free one by entering the details
into the IP address, subnet and gateway fields.
Max Transmission Rate kbits/sec This shows the maximum transmission speed for the network type being
used. If set to ‘0’, transmission speed is not limited in the camera.
Note: This setting will limit and override any higher transmission rate entered in the Video Transmission
menu (Configuration menu->Live Trans).
Force 10BaseT operation The unit supports 10 or 100BaseT half duplex transmission. Selecting this option
will force the unit to operate at a 10BaseT connection.
Tx Image Buffers This is used in order to improve the picture delivery over Ethernet when using a slow
connection i.e. 256Kbps. A buffer setting of 1,2 or 3 is available (default setting is 1).
Ethernet MTU Bytes This is the maximum transmit unit for the Ethernet packet. The MTU is the largest
physical packet size measured in bytes that the network can transmit. By default this figure is set to
1500bytes.
Max Transmission Timeout ms This is the time (in milliseconds) the unit will wait to re-send a packet if an
acknowledgement is not received.
Reset (Red) Resets the unit to apply changes.
Rem Report (Green) Opens the Network Settings->Remote Reporting page.
Webcam (Yellow) Opens the Network Settings->Web Camera Configuration page.
Email (Blue) Opens the Network Settings->Email page.
Refresh (Purple) Refreshes the current page.