Dedicated Micros ©2008
MSU
Replacing a Hard Drive
Procedure
1)
Follow the steps detailed in the section ‘Opening the MSU’
2)
Identify the hard drive to be removed. Each hard Drive is secured by four screws.
Remove the screws and lift the hard drive up. Retain the screws.
3)
The SATA and power connection are incorporated into one plug. Remove the plug
from the back of the drive.
4)
Replace the hard drive with a replacement unit from Dedicated Micros. Secure the
hard drive using the previously removed screws.
Note:
Remember the catch on the drawer slider needs to be unlatched to allow the drawer to
close properly.