Dedicated Micros ©2007
Domes
Camera Care
In order to avoid damaging your camera, note the following points:
CAUTION
•
Remove all packaging inserts and the protective film from the dome cover before
using the camera.
•
Do not touch the image surface of the sensor. If the sensor is accidentally touched,
only clean it using isopropanol.
•
Do not expose the camera sensor to very bright light over a long period of time as
this may cause damage to the CCD sensor. The camera and lens set-up must be
correct to avoid possible damage due to long term exposure to bright light. A lens
with an automatic iris is recommended under these conditions.
