draft
Dedicated Micros ©2008
10
D
V-IP HD
PTZ Program Option
The Program page allows preset settings for PTZ cameras to be established and an ‘Origin’ base
position established for a camera.
Note:
This page will not be available for all cameras.
Red
Store
Used to save the current camera view as a
Preset for that camera. Press this button then a
preset position (using the number keys on the IR
Remote Control or optional Keyboard if viewing
via a local monitor).
To re-send the camera to this position, select
the camera, then press Next -> Preset -> (preset
number).
Note:
When entering a new preset, any previous preset assigned to that number (for the same
camera) will be overwritten.
Green
Dome Menu
Select to display menu pages displaying
information relevant to the connected camera.
Select the Dome Menu (Green) again to cycle
through available menus.
Yellow
Select
This option will send the camera to
the stored ‘Preset1’ position.
Blue
Set Origin
The Origin option allows a base position to
be established for the Oracle dome camera.
The camera will register this position as zero
degrees. Any command that sends the camera
to a coordinate will use this origin as its starting
point.
Refer to ‘Console Settings-Map Config
-Hotspot Origin’ for more information)
.
Note:
This option is only available for Oracle dome cameras.
Purple
Next
Opens the next page of the Viewer menu.
Note:
These menu options will only be available when viewing a PTZ camera in Live mode.
