draft
Dedicated Micros ©2008
10
D
V-IP HD
Telemetry Camera Options
The Telemetry camera page allows Oracle Dome cameras to be controlled directly via the Point&go
feature and be sent to preset positions.
The eZoom feature allows navigation within video image i.e. the image from the camera is enlarged
and the operator has the ability to pan around the image. This feature is best utilised with high
resolution cameras, giving the operator the ability to electronically zoom into an area. The unit will
request a higher resolution image of the zoomed area, to show increased detail.
The functionality available will depend on the type of camera being viewed. The unit will recognise
which camera type is being accessed and display relevant symbols in the top right of the screen
(when viewing via a local monitor).
Red
Preset
If Preset positions have been established for
the PTZ camera, select the Preset option and
enter a preset number.
Refer to the ‘PTZ Profile
menu’ for further details on establishing preset
positions
.
Green
PTZ/ePTZ
Switches between PTZ and ePTZ mode. In
ePTZ mode, it is possible to zoom in/out of and
scroll around the image (the camera itself is not
being controlled).
PTZ mode will control an Oracle Dome camera
via the Point&
go
feature. R
efer to the ‘Point&go’
section
for further information.
Yellow
Aux
Activates the camera Auxiliary controls e.g.
wash, wipe etc. Press the Aux button followed by
the relevant Keyboard numeric button (if using
optional connected Keyboard).
Blue
Prog
Opens the Preset programming menu.
Refer to
‘PTZ Profile’ menu
.
Purple
Next
Opens the next page of the Viewer menu.
Note:
The above menu options will only be available when viewing a PTZ camera in Live mode.
