19
Stem Superbox DCR
4. Cables Routing
Superbox stem is compatible for both external
and full internal cable routing.
4.1
•
Traditional Bicycle Frame
In case of assembling on traditional frameset
(external cable routing), Superbox stem can be
installed without the S-DCR cover (8).
4.2
•
Bicycle Frame Dcr Compatible
DCR compatible frames require a 1”-1/8 fork
steerer and 1.5” headset upper bearing. In this
configuration, you must use the 56mm top cover
(12) and the black compression ring of DCR
original bearing 45° × 45° or the grey version for
36° × 45° bearing type (14). In order to get the
complete internal cables routing, the bicycle
frame and the fork have to be compatible.
Following features are the compulsory technical
requirement. Discover more about the DCR
compatibility with your frame on the website
www.dedaelementi.com
4.2.1
•
Fork
Deda DCR system requires an entry hole for the
front brake cable located at the fork steerer, this
allow the cable routing up to disc brake caliper.
4.2.2
•
Upper bearing seat for dcr system
The upper bearing seat must respect the
following specifications:
Front Disc Brake
Cable Routing
Fig. 4.1
Front cable housing cable
Fig. 4.2
Upper bearing seat size
Ø 56,0
Ø 28,7
+0.2/-0
8,8
0,3
8,7
8,8 0,3
