background image

3

Thank You

By purchasing the Zen Triode amplifier you

have illustrated a desire to rise past the nor-

mal hi-end hype and own a truly exceptional

piece.  It is a product based on the old school

way of doing things when it was fashionable

to push quality to an art form.  Your amplifier

was hand-built by the very best artisans who

have perfected the craft through the experi-

ence of building well over one thousand am-

plifiers, each one at a time.

Please Take a Moment

The serial number and date of your amplifier

are recorded on the bottom of the amplifier.

These are important to keep on the amplifier

for identification purposes.  You may need

them for insurance claim or future service.

Please use the spaces below to record this

information for safe keeping.

Serial Number:

Purchase Date:

Model Number:

Technical Assistance

You can reach technical assistance by simply

contacting Decware directly.  You can also e-

mail us directly from our web site at

www.decware.com  Please feel free express

any questions you may have about your pur-

chase or how it can be best utilized in your

present system.   You can also find help on-

line in our support forums on decware.com

Decware / High Fidelity Engineering Co.

75 S. Riverview Dr.

East Peoria IL 61611

Phone: (309) 822 5255

www.decware.com

Table of Contents

Safety Instructions........................

2

Thank You....................................

3

Technical Assistance......................

3

Table of Contents..........................

3

Important Information....................

4

Connector Information....................

4

Fuse Location / Information.............

4

WARNING.....................................

4

Output tube warning......................

5

Other output tube information.........

5

Tube life.....................................

5

Input tube information...................

6

Rectifier tube information...............

6

Where everything goes..................

7

Introduction................................

7

Performance features....................

7

Dimensions..................................

8

Placement...................................

8

Heat Output................................

8

Stereo / Mono operation................

9

How to Operate...........................

9

Burn-in Process............................

9

Specifications..............................

10

Schematic..................................

11

Summary of Contents for SE84C+












Reviews: