Decware SE84C+, Owner'S Manual

Page: 10 / 11

SPECIFICATIONS
•
Weight 13 lbs. ea.
•
Dimensions 8.5" H x 7.250" W x 14.0" D
•
Circuit type Single ended Class A Triode
•
Power output 2.3 watts RMS into 4 ohms
•
5 watts RMS into 8 ohms when bridged
•
NOTE: Power increases as ohms decrease
•
Stable into 1 ohm speaker loads
•
Input voltage 2.0 volts for full output
•
Noise / Hum Less than 1.5 millivolts (amazing for tube gear)
•
Response 20 Hz ~ 20 kHz
•
Feedback ZERO negative feedback used
•
Rectification 5U4G tube rectification
•
Output tubes SV83, 6P15P-EV, 6n15n-EB or EL84/6BQ5
•
Signal tube 6N1P or 6922 or 6Dj8
•
Transformers All transformers are custom made for this amplifier by Decware
•
Biasing Self-Biasing circuit - never needs adjustment
•
Resistors All resistors are precision WW/MF by DALE, VISHAY
•
Signal Cap Film and Foil
•
Filter Caps All filter caps are US made SPRAGUE/ATOM
•
AC cord Fused IEC connector provided with removable power cord
•
Consumption 65 watts at full power
•
Input jacks RCA type 24K Gold / Teflon
•
Output jacks Gold 5-way binding posts accept 8 gauge wire
•
Speaker dB/1w 89 dB minimum / 96 dB is ideal
•
Warranty Lifetime to original owner / 90 days on tubes