1c. PAIRING A REMOTE AND INITIAL SETTINGS
Before starting the process of pairing a handheld remote to a Dream motor, choose the channel to
which it is to be paired.
Channel Zero is reserved for simultaneously controlling all blinds paired to a remote and cannot be
used for pairing, programming or other adjustments
If using a battery powered motor, ensure that it is su� ciently charged to complete the set-up process.
Charging a motor from empty will take approximately 6 hours.
PAIRING A REMOTE WITH A MOTOR
SWITCHING DIRECTION
SETTING THE TOP LIMIT
Motor
jogs x1
Motor
beeps x1
Motor
jogs x2
beeps x3
Release
P1
Press for 2sec
within 10s
PAIRING
COMPLETE
Press P1
for 2sec
Note:
After pairing a remote and before setting limits, the motor will be defaulted to jog-mode. To
switch to continuous-mode, see
ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG
MODE AND CONTINUOUS MODE on
page 15.
Note:
Switching direction with a remote device is only possible before setting top and bottom limits.
To switch after limits have been set, see P1 BUTTON SETTINGS - SWITCHING DIRECTION
on page 14.
Press together
for 2sec
DIRECTION
SWITCHED
Motor
jogs x1
Run blind to
top position
Press together
for 2sec
TOP
LIMIT SET
Motor jogs x2
Beeps x3
1c. PAIRING A REMOTE AND INITIAL SETTINGS
Before starting the process of pairing a handheld remote to a Dream motor, choose the channel to
which it is to be paired.
Channel Zero is reserved for simultaneously controlling all blinds paired to a remote and cannot be
used for pairing, programming or other adjustments
If using a battery powered motor, ensure that it is su� ciently charged to complete the set-up process.
Charging a motor from empty will take approximately 6 hours.
PAIRING A REMOTE WITH A MOTOR
SWITCHING DIRECTION
SETTING THE TOP LIMIT
Motor
jogs x1
Motor
beeps x1
Motor
jogs x2
beeps x3
Release
P1
Press for 2sec
within 10s
PAIRING
COMPLETE
Press P1
for 2sec
Note:
After pairing a remote and before setting limits, the motor will be defaulted to jog-mode. To
switch to continuous-mode, see
ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG
MODE AND CONTINUOUS MODE on
page 15.
Note:
Switching direction with a remote device is only possible before setting top and bottom limits.
To switch after limits have been set, see P1 BUTTON SETTINGS - SWITCHING DIRECTION
on page 14.
Press together
for 2sec
DIRECTION
SWITCHED
Motor
jogs x1
Run blind to
top position
Press together
for 2sec
TOP
LIMIT SET
Motor jogs x2
Beeps x3
SETTING THE BOTTOM LIMIT
SWITCHING FROM CONTINUOUS MODE TO JOG MODE
Run blind to
bottom
position
BOTTOM
LIMIT SET
Motor jogs x2
Beeps x3
Press together
for 2sec
Note:
After setting top and bottom limits, the motor will automatically switch to continuous mode.
To switch to jog mode, see ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG MODE
AND CONTINUOUS MODE on page 15.
Note:
When in jog mode, holding the up or down buttons will provide continuous-moving temporarily.
1d. ADVANCED SETTINGS
Visit our YouTube channel for video equivalent
of these instructions.
DREAM RANGE PROGRAMMING INSTRUCTIONS
- PAIRING A REMOTE AND INITIAL SETTINGS
Hold together
for 5sec
Press for
1sec
Motor
jogs x1
Motor jogs x1
Beeps x1
JOG
MODE
SETTING THE BOTTOM LIMIT
SWITCHING FROM CONTINUOUS MODE TO JOG MODE
Run blind to
bottom
position
BOTTOM
LIMIT SET
Motor jogs x2
Beeps x3
Press together
for 2sec
Note:
After setting top and bottom limits, the motor will automatically switch to continuous mode.
To switch to jog mode, see ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG MODE
AND CONTINUOUS MODE on page 15.
Note:
When in jog mode, holding the up or down buttons will provide continuous-moving temporarily.
1d. ADVANCED SETTINGS
Visit our YouTube channel for video equivalent
of these instructions.
DREAM RANGE PROGRAMMING INSTRUCTIONS
- PAIRING A REMOTE AND INITIAL SETTINGS
Hold together
for 5sec
Press for
1sec
Motor
jogs x1
Motor jogs x1
Beeps x1
JOG
MODE
WATCH THE VIDEO
SWITCHING FROM JOG MODE TO CONTINUOUS MODE
INCREASING MOTOR SPEED
BATTERY MOTORS ONLY
DECREASING MOTOR SPEED
BATTERY MOTORS ONLY
SETTING A FAVOURITE STOP POSITION
Hold together
for 5sec
Press for
1sec
Motor
jogs x1
Motor jogs x2
Beeps x3
CONTINUOUS
MODE
Note:
When in jog mode, holding the up or down buttons will provide continuous-moving temporarily.
Note:
If the motor does not response to these instructions, it has already reached its upper speed setting.
Note:
If the motor does not response to these instructions, it has already reached its upper speed setting.
Press for
1sec
Motor jogs x2
Beeps x1
SPEED
INCREASED
Press P2
for 1sec
Press for
1sec
Motor jogs x1
Beeps x1
Motor jogs x1
Beeps x1
Motor jogs x2
Beeps x1
SPEED
DECREASED
Press P2
for 1sec
Press for
1sec
Motor jogs x1
Beeps x1
Press for
1sec
Motor jogs x1
Beeps x1
Run shade to
desired position
Press P2
for 1sec
Press
for 1sec
FAVOURITE
POSITION
SET
Motor jogs x1
Beeps x1
Motor jogs x1
Beeps x1
Press
for 1sec
Motor jogs x2
Beeps x3
