2. PAIRING A REMOTE AND INITIAL SETTINGS
Hold P1
for 6sec
Motor
jogs x2
Beeps x2
SLEEP
MODE
Release
P1
SLEEP MODE
SWITCHING DIRECTION
RESTORING FACTORY SETTINGS
Note:
Sleep mode can be utilised to temporariliy deactivate a motors’s radio functionality, allowing
for multiple motors to be added to a shared channel without disruption.
Press P1
to restore
functionality.
Hold P1
for 10sec
Motor
jogs x3
Release P1
Beeps x3
DIRECTION
SWITCHED
Note:
Switching direction using the P1 button is only available once a remote has been paired
with the motor.
Hold P1
for 14sec
Motor jogs x4
Beeps x4
FACTORY
SETTINGS
RESTORED
Visit our YouTube channel for video equivalent
of these instructions.
DREAM RANGE PROGRAMMING INSTRUCTIONS
- OVERVIEW AND P1 FUNCTIONALITY
Hold P1
for 6sec
Motor
jogs x2
Beeps x2
SLEEP
MODE
Release
P1
SLEEP MODE
SWITCHING DIRECTION
RESTORING FACTORY SETTINGS
Note:
Sleep mode can be utilised to temporariliy deactivate a motors’s radio functionality, allowing
for multiple motors to be added to a shared channel without disruption.
Press P1
to restore
functionality.
Hold P1
for 10sec
Motor
jogs x3
Release P1
Beeps x3
DIRECTION
SWITCHED
Note:
Switching direction using the P1 button is only available once a remote has been paired
with the motor.
Hold P1
for 14sec
Motor jogs x4
Beeps x4
FACTORY
SETTINGS
RESTORED
Visit our YouTube channel for video equivalent
of these instructions.
DREAM RANGE PROGRAMMING INSTRUCTIONS
- OVERVIEW AND P1 FUNCTIONALITY
Hold P1
for 6sec
Motor
jogs x2
Beeps x2
SLEEP
MODE
Release
P1
SLEEP MODE
SWITCHING DIRECTION
RESTORING FACTORY SETTINGS
Note:
Sleep mode can be utilised to temporariliy deactivate a motors’s radio functionality, allowing
for multiple motors to be added to a shared channel without disruption.
Press P1
to restore
functionality.
Hold P1
for 10sec
Motor
jogs x3
Release P1
Beeps x3
DIRECTION
SWITCHED
Note:
Switching direction using the P1 button is only available once a remote has been paired
with the motor.
Hold P1
for 14sec
Motor jogs x4
Beeps x4
FACTORY
SETTINGS
RESTORED
Visit our YouTube channel for video equivalent
of these instructions.
DREAM RANGE PROGRAMMING INSTRUCTIONS
- OVERVIEW AND P1 FUNCTIONALITY
WATCH THE VIDEO
1c. PAIRING A REMOTE AND INITIAL SETTINGS
Before starting the process of pairing a handheld remote to a Dream motor, choose the channel to
which it is to be paired.
Channel Zero is reserved for simultaneously controlling all blinds paired to a remote and cannot be
used for pairing, programming or other adjustments
If using a battery powered motor, ensure that it is su� ciently charged to complete the set-up process.
Charging a motor from empty will take approximately 6 hours.
PAIRING A REMOTE WITH A MOTOR
SWITCHING DIRECTION
SETTING THE TOP LIMIT
Motor
jogs x1
Motor
beeps x1
Motor
jogs x2
beeps x3
Release
P1
Press for 2sec
within 10s
PAIRING
COMPLETE
Press P1
for 2sec
Note:
After pairing a remote and before setting limits, the motor will be defaulted to jog-mode. To
switch to continuous-mode, see
ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG
MODE AND CONTINUOUS MODE on
page 15.
Note:
Switching direction with a remote device is only possible before setting top and bottom limits.
To switch after limits have been set, see P1 BUTTON SETTINGS - SWITCHING DIRECTION
on page 14.
Press together
for 2sec
DIRECTION
SWITCHED
Motor
jogs x1
Run blind to
top position
Press together
for 2sec
TOP
LIMIT SET
Motor jogs x2
Beeps x3
