PARING A WALL SWITCH AND INITIAL SETTINGS
Motor
jogs x1
Motor
beeps x1
Motor
jogs x2
beeps x3
Release
P1
Press for 2sec
within 10s
PAIRING
COMPLETE
Press P1
for 2sec
Press together
for 2sec
DIRECTION
SWITCHED
Motor
jogs x1
PARING A WALL SWITCH WITH A MOTOR
SWITCHING DIRECTION
Run blind to
top position
Press together
for 2sec
TOP
LIMIT SET
Motor jogs x2
Beeps x3
Run blind to
bottom position
Press together
for 2sec
BOTTOM
LIMIT SET
Motor jogs x2
Beeps x3
SETTING THE TOP LIMIT
SETTING THE BOTTOM LIMIT
Before starting the process of pairing a wall switch to a Dream motor, choose the channel to which it
is to be paired. Channel Zero is reserved for simultaneously controlling all blinds paired to a wall switch
and cannot be used for pairing, programming or other adjustments.
If using a battery powered motor, ensure that it is sufficiently charged to complete the set-up process.
Charging a motor from empty will take approximately 6 hours.
Note:
After pairing a wall switch and before setting limits, the motor will be defaulted to jog-mode. To switch to continuous-mode,
see
ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG MODE AND CONTINUOUS MODE
.
