decorflame QCM525-47BDC, Instruction Manual

Page: 5 / 38

5
MANTLE AND
INSERT ASSEMBLY:
WARNING: Make sure the fireplace INSERT
controls are in the OFF position and the
INSERT is NOT plugged in.
CAUTION: Place a piece of cardboard or
protective sheet on the floor in order to avoid
scratching the decorative surface of your
mantle during assembly.
Please DO NOT fully tighten the KD screws
until all panels are assembled.
Step 1: Attach all PLASTIC CONNECTOR [R] to
the parts [C, D, G and H] as shown in Fig 1. (2
screws for each PLASTIC CONNECTOR)
A S S E M B LY I N S T R U C T I O N S
PARTS LIST:
A) Top panel 1
B) Base panel 1
C) Upper front panel 1
D) Side panel 2
E) Left front panel 1
F) Right front panel 1
G) Left small panel 1
H) Right small panel 1
I) Mid front panel 1
J) Left decorative panel 1
K) Right decorative panel 1
L) Front decorative panel 1
M) Long KD screws
61
N) Small brackets 3
O) Short KD screws 3
P) Medium brackets 4
Q) Medium KD screws 4
R) Plastic connectors 14
S) SELF REPAIR SET
Touch-up repair paint (bottle)
L shape bracket
8
Screws for L shape 32
Plastic Connector 1
KD Screws 3
KD Nuts 3
T) WALL ANCHOR SAFETY CABLE
Wall Anchor
1
Screw for wall anchor 1
Screw for mantle 1
Safety cable 1
Fig. 1
Tools required: Electric drill, drill bits 5/16 in (8 mm), hammer,
Philips Screwdriver, Safety Goggles and gloves (if necessary).