8
4. Attach the plastic connector and lock in place with KD screws as shown in Fig. D.
Fig. D
OPTION 2:
Use the small L-brackets and screws.
1. Place the small L-bracket to the unit as shown and mark the drill-holes on the
mantel as shown in Fig. E.
Fig. E
2. Drill the holes with diameter 1/16 inches (2 mm) and depth 5/16 inches (8 mm) on
the mantel. Each small L-bracket needs 4 holes. See Fig. F.
Fig. F
Fig. G
3. Attach the small L-bracket and lock in place with screws as shown in Fig. G.
clEANiNG
To clean the unit, first turn off the controls on the unit and unplug the unit from power
source. To clean glass display panel; remove dust with clean dry cloth or to remove
finger prints and other marks clean glass with clean damp cloth. Do not use abrasive
cleaners or spray liquids on glass display panel surface. Metal and metal painted parts
should be cleaned with damp cloth. Do not use abrasive cleaners or spray liquids on
these surfaces.
rEPlAcEMENt PArtS
Item
Part #
Qty
Self repair kit
RE-KIT
1
Hardware kit
902L-42HWT#1
1
WArrANtY
Every electric stove is tested before it leaves the factory and it is guaranteed for
one year. If the unit should fail to operate correctly within one year from the date of
purchase, call customer service at 1-844-455-4621 We will, at our discretion
either repair or replace the unit. It will have to be returned to us freight prepaid
and we will return the repaired or replaced unit to you freight prepaid. The company’s
sole obligation is to repair or replace the unit. This warranty is void if in the opinion
of
the unit has been tampered with, altered, misused, damaged, abused or
used with the wrong power source. Light bulbs are not covered by this warranty.
The warranty is for homeowner use only and does not cover units used in commercial
situations.
WARRANTY CLAIM PROCEDURE
If a claimable defect occurs, please
contact our customer service department at
1-844-455-4621
Before you make your claim call, please make sure you have:
1.
The description of the electric stove
2.
Proof of sale
3.
Details regarding the defect
4.
Name and address of the owner
and installer
Claims must be lodged within six (6) months of appearance of defect. Failure
to comply with this stipulation will make the warranty null and void. We reserve
the right to a thirty-day (30) delay following receipt of claim in which to inspect the
product. We assume no responsibility for labor costs, removing/replacing a previously
installed product, transportation or return of a product.
Manufactured by
NO.169,KAN BEI ROAD,201412
www.hzflametec.com
Made in China
SHANGHAI HUANGZHOU INDUSTRY CO.,LTD
SHANGHAI,CHINA
1-844-455-4621
Huang Zhou
