Decor Star
PL-006-SS
Rev. A3 122015
9
Installation (cont.)
7. Hang the unit on the wall. Make sure the
unit is seated properly. Apply silicon sealant
on both sides of the shower panel to complete
the installation. (
NOTE:
do not seal the bottom
of the panel, this will allow any possible future
leaks to drain out the panel)
8. Disassemble the water supply hose assem-
bly by loosen the compression nut (C),remove
compression ring (B) and pull out the elbow
connetor (A)
A
B
C
D
9. Measure the length needed for the main
water supply hoses. Trim off the excess PVC
tubing.
