deconta AS 300 S, Instruction Manual

Page: 8 / 10

Instruction manual
Waste water filtration unit AS 300 S
Seite 8
7 Initial operation
Attention
The pump may not be operated without water.
Before the initial operation of the waste water pump or after a long period of stagnation,
check that the shaft rotates freely when turned by hand. To this put a screwdriver in the
notch of the shaft end on the fan side and move the shaft. In winter the unit may only be
operated in a frost-protected area.

Fill waste water pump fully through vent connection

Connect waste water hose

Make connection between „Sewage“ and Sewer

Establish power supply 230V

Fill 1/3 of settling tank with water

Switch on unit (Position „MAN“ at selector switch) and check, if water is pumped out
of settling tank

Turn selector switch to „Auto“
The unit is now ready for operation.
Connection
Dirty water
Switch
Manual/Auto