60
9
Maintenance
and Adjustment
9.2 Adjusting the Parts
9.2.1 Anti-tip device
WARNING
Traveling with the anti-tip device detached, retracted, or
made shorter than the “standard length” may cause a
rollover. Never travel without adjusting the anti-tip
device properly.
Step
1
Remove the retaining bolt.
Use a hex wrench to remove the retaining
bolt from the anti-tip device.
• Tool: 5 mm hex wrench
Step
2
Set the
“
standard length
”
.
Slide the bar and adjust it to the
“standard length”.
NOTE
“Standard length” means the adjusted length of the anti-tip device
so that they touch the ground when the casters are lifted 5 to 10
cm.
Step
3
Install the retaining bolt.
Use a hex wrench to tighten the retaining
bolt on the anti-tip device.
• Tightening torque: 6 to 8 N·m
Retaining
bolt
