23
Operation
Adjusting the spray pattern
Risk of injury!
Improper handling of the fine paint sprayer could result in injuries.
− Avoid pulling the trigger at all costs while you adjust the air cap.
− Each time before making an adjustment you must make sure that
the fine paint sprayer is OFF.
You can set three different spray patterns on the fine paint sprayer to
suit the application and object (see
Fig. G
):
Position
Pattern
Application
A
Vertical cone
Horizontal surfaces
B
Horizontal cone
Vertical surfaces
C
Round cone
Corners, edges, surfaces that are difficult
to access.
Spray pattern of the spraying unit for enamels and varnishes
When you turn the adjusting ring, take care not to loosen the union
nut and unscrew it from the spraying unit. After you have set the
required spray pattern, tighten the union nut again by screwing
clockwise.
− Turn the adjusting ring (
12
) at the union nut clockwise or coun-
ter-clockwise in order to move the air cap (
19
) to the required
spray pattern position (see
Fig. G
).
Layout_DS_FSS_500_EX_UK_SPK7.indd 23
Layout_DS_FSS_500_EX_UK_SPK7.indd 23
19.11.2020 15:15:29
19.11.2020 15:15:29