SI-3
™
U
ser
’s M
anual
5
About This Manual
This manual contains valuable information to help you set up, use
and maintain your radar, so you can optimize its life and keep it at
peak performance . Please take a moment to read through it, and
keep it handy for future reference .
Note the following symbols in this manual:
Indicates a warning message about safety
precautions . Please read it carefully .
Indicates a helpful tip or precaution to note .
1. Safety Information
All service needs should be referred back to the manufacturer .
WARNINGS
• Do not over voltage the radar - it can damage the unit!
• The SI-3™ is designed to operate off of conventional
+12 VDC (+10 .8 to +16 .5 VDC) from the serial cable .
Important Warnings
• Opening the SI-3™ automatically voids any warranty
still in effect . There are no user serviceable parts inside .
• Do not expose the SI-3™ to excessive moisture . Never
submerge the device .
• Do not drop the SI-3™ on hard surfaces since damage
could occur . Units damaged by dropping or abuse are
not covered for warranty repair .
Violation of these guidelines may void the warranty .
