RAILMASTER-VP™ USER’S MANUAL
11
2.2 Controls
The faceplate control panel consists of three buttons
MODE, SELECT,
and
POWER
for navigating in two
menus, the primary and secondary.
Figure 2.2 The control panel
2.2.1 Mode and Select
The
MODE
and
SELECT
buttons let you select
options in a primary and secondary menu. To
access the primary menu press
MODE
to see each
option, then press
SELECT
to see the setting
choices for the option. To access secondary
menu options, press and hold the
SELECT
button, then press
MODE
to see each option.
When you see the option you want to change,
press the
SELECT
button until you see the
setting for the option that you want. To select
the setting, display it in the window until the
system times out. (See section 3 Operating Modes
for more on the menus and available options.)
2.2.2 Power
The
POWER
button turns the device on and off.
If the select button is pressed on during power up, the
system will reset to the factory default settings.
