6
PRODUCT DESCRIPTION
Electrically-assisted bike technical features
A
Battery
B
Battery lock handle and barrel
C
Motorised unit
D
Control screen
E
Cable from the controller screen to the motorised unit
General operation of the electrical assistance
The power-assisted bike can be used with or without assistance by pressing the ON/OFF button or altering the modes 0-1-2-3-4. The selectable
0-1-2-3-4 assistance modes on the «D» display screen allow you to choose a power assist level in addition to the effort provided. Power assistance
will only work if you are pedalling, with a selected mode other than 0. Assistance cuts off when the speed is above 25km/h. In case of intensive use
and in exceptional climatic conditions, assistance may be cut off to safeguard the whole system.
The power supplied is calculated by the motorised unit controller «C» based on your pedalling rate and the force applied to the pedals. The control
-
ler «C» will provide more or less power depending on the mode selected and the force applied.
Power assistance does not kick in or shuts down in the following situations:
-
The speed is above 25km/h
-
You’re not pedalling
-
The remaining battery charge is not sufficient
-
»0» is the power assistance mode selected
-
When the control screen is off
In case of intensive use and in exceptional climatic conditions, power assistance may be cut off to safeguard the whole system
A
B
C
D
E
