NOTE: Make sure the jar cover is placed in position
completely before operating, and never open the jar cover
during operation.
Do not run the appliance for more than 2 minutes per time,
and only wait until the unit is cooled to room temperature
before performing next operation cycle.
Turn the Speed Selector to “ 0” position once the mixture has
been blended to your desired consistency.
Turn the jar anti-clockwise and remove it from the motor unit,
carefully take down the jar cover, then pour and serve.
Never operate the appliance continuously for more than 2
minutes per time.
Blades are very sharp. Handle with care.
Do not operate without the jar cover in place.
Do not disassemble the jar or bowl from the jar base or bowl
base in general condition.
04
WARNING
Open the jar cover by turning anticlockwise and place it on the
surface. Peel or core the fruits or vegetables and then cut it
into small pieces, then put them into the jar. Usually certain
amount of purified water has to be added to facilitate the
smooth running of appliance. The amount of mixture should
not exceed the max level as indicated on the jar, nor sit lower
the min level. The best proportion of the fruits or vegetables
and water is 2:3.
NOTE: The blender is not applicable for beating egg white,
mashing potatoes, mixing dough, extracting juice from fruit
and vegetable.
Replace jar cover on the jar and turn it clockwise.
NOTE: There is a safety interlock device at the side of jar
cover, if the jar cover is not assembled in place, the blender
will not operate.
You may add ingredients into the jar through the center
opening of jar cover during operation, then replace measuring
cup if necessary. Let the tabs of measuring cup aligns with the
grooves of jar cover, put down and turn the measuring cup by
clockwise until it in place.
Ensure the Speed Selector to “ 0” Position, then plug into
power outlet and set Speed Selector to your desired setting.
You can press down the Pulse button without releasing it if
want to accelerate the process of blending. The detailed
information is shown in below Fig. 1
Fig. 1
