05
AFTER USE
When you have finished, switch off the clipper by setting
the On/Off switch to “1”position. Always clean the blades
after use.
Care and Cleaning
The hair clipper must be unplugged before cleaning.
1.Remove the comb attachment (if fitted).
2.Clean the blades and comb attachments with the
cleaning brush (supplied) to remove remaining loose hair
clippings.
3.Clean the housings of the clipper with a soft, dry cloth.
4.The cutting blades should be tightly oiled with your own
oil once every few haircuts as show.
5.The LCD display will remind you to add oil every 2 hours
of cutting. The “Oil blades” will shine.
TO REMOVE THE CUTTING BLADES
Periodically it is advisable to remove the blade assembly for
more thorough cleaning.
1.Ensure that the On/Off switch is set to the “1’postion.
2.Using your thumb from the front of the clipper, Press back
against the cutting blades. The blade assembly will snap out
of the blade holding base.
3.Clean the blade assembly and inside the blade holding base
thoroughly with the cleaning brush (Supplied).
4.Re-assemble the blade assembly by engaging the bottom
latch, then pressing the top into the blade holding base.
Do not
use any harsh detergents, abrasives, solvents or
Summary of Contents for KMHS004W
Page 1: ...KMHS004W HAIR CLIPPER ...
Page 4: ......
