03
NOTE: It is advisable to start with the longest cut (12mm) and
cut again with a different comb if a shorter cut is required.
SETTING THE CUTTING LENGTH
To set the cutting length, rotate the cutting length control ring
to your desired cutting length(0.8/1.2/1.6/2.0/2.5mm).The
cutting length is marked on the cutting length control ring as
shown.
CUTTING HAIR
1.Before starting, comb the hair in the direction of your hair
growth as shown.
2.Switch on the clipper by sliding the On/off switch to “O”
position. When the clipper has adequate power, the LCD
display will illuminate. If the LCD charger plug signs flashes,
the clipper should be recharged at the first opportunity.
3.Pressing the comb against the head, start by clipping the
sides from the bottom of the head upwards. Slowly move the
clipper up towards the top of head cutting small amounts at a
time.
Summary of Contents for KMHS004W
Page 1: ...KMHS004W HAIR CLIPPER ...
Page 4: ......
