Installation Guide
5.
Connect the IDE cable and 4-pin DC power cable (Figure 4).
IDE Cable
4-Pin Power Cable
L J - 0 3 0 4 1 - T I 0
Figure 4. Connecting Cables
6.
Verify that your computer has an ISA or an EISA bus.
Bus
Configuration Utility
ISA (16-bit)
System setup utility
EISA (32-bit)
System Configuration Utility (SCU)
Run the appropriate setup utility to enter the new drive parameters. See your
computer user guide for the configuration instructions.
7.
Select the Hard Drive 1/Hard Drive 2 field in the appropriate setup utility.
Using the following logical addressing parameters (Table 3), you either:
•
Select a drive type, from a predetermined list of drives, that matches these
parameters, or
•
Enter the parameters as a user-definable hard drive.
6