Installation Guide
Table 1. Jumper Functions and Default Settings
Jumper
Function
Default Setting
SS
Reserved for factory use
Open
*
CS
Cable select
Open
SY
Synchronization (disk array)
Open
SP
Slave present
Open
DS
Drive select
Jumpered
†
* Only located at J9
† DS jumpered at J9 and DS open at J12
Drive Select (DS) Jumper Configurations
The drive is configured at the factory as a master drive with the DS pins jumpered on
J9. If you install the drive as a slave, park the factory-installed DS jumper.
The DS jumper is a small plastic block that plugs onto a pair of pins. Figure 2 shows
the J9 DS pins both jumpered (master drive) and open/parked (slave drive).
DS
SP
SY
DS
SP
SY
L J - 0 3 0 3 9 - T I 0
Jumpered
Open/
Parked
J9
Figure 2. DS Jumper Configurations
3