EN-1
GULLIVER
Electromechanical operators for industrial
sliding gates
Operating instructions and warnings
Index
1
Warnings Summary
EN-1
6
Start-up
EN-7
2
Product Description
EN-3
6.1
Installation Test
EN-7
3
Technical data
EN-3
6.2
Unlocking and manual operation
EN-7
4
Installation and Assembly
EN-4
7
Maintenance
EN-7
5
Electrical Connections
EN-5
8
Product Disposal
EN-8
1 WARNINGS SUMMARY
WARNING! I
mpoRtANt
sAfety
INstRuctIoNs
. c
ARefully
ReAd
ANd
folloW
All
WARNINGs
ANd
INstRuc
-
tIoNs
thAt
AccompANy
the
pRoduct
sINce
INcoRRect
INstAllAtIoN
could
cAuse
hARm
to
people
,
ANImAls
oR
thINGs
. W
ARNINGs
ANd
INstRuctIoNs
pRovIde
ImpoRtANt
INfoRmAtIoN
ReGARdING
sAfety
,
INstAllAtIoN
,
use
ANd
mAINteNANce
. K
eep
the
INstRuctIoNs
toGetheR
the
techNIcAl
documeNtAtIoN
ANd
foR
futuRe
RefeReNce
.
WARNING
The device may be used by children of less than 8 years of age, people with
reduced physical, mental or sensory impairment, or generally anyone without experience
or, in any case, the required experience provided the device is used under surveillance or
that users have received proper training on safe use of the device and are aware of the
dangers related to its use.
WARNING
Do not allow children to play with the device, the fixed commands or the ra
-
dio controls of the system.
WARNING
Product use in abnormal conditions not foreseen by the manufacturer may
generate hazardous situations; meet the conditions indicated in these instructions.
WARNING
DEA
System reminds all users that the selection, positioning and installa-
tion of all materials and devices which make up the complete automation system, must
comply with the European Directives 2006/42/CE (Machinery Directive), 2014/53/UE
(RED Directive). In order to ensure a suitable level of safety, besides complying with local
regulations, it is advisable to comply also with the above mentioned Directives in all extra
European countries.
WARNING
Under no circumstances use the device in an explosive atmosphere or in
areas that may be corrosive or could damage product parts. Check that the temperatures
at the installation site are suitable and comply with the temperatures declared on the
product label.
WARNING
When working with the “dead man” switch, make sure that there are no pe-
ople in the area where the automatism is being used.
WARNING
Check that there is a switch or an omni polar magneto-thermal circuit bre-
aker that enables complete disconnection in case of over voltage category III conditions
installed upstream from the power system.
