Cleaning the moving reflection panel and the fixed mirror
-
Remove the 10 bolts at the edge of the front panel with the hexagon tool. The front
comes lose, be careful that it does not drop!
-
The big round slide disk is locked with an M14 nut. Remove it.
-
Now, very gently, pull on two opposite edges of
the disk, to get the disk loose of its axle.
-
You should now be able to clean the mirror and the moving reflection plate.
DON’T
remove the reflection plate or mirror by taking out some bolts for better
cleaning. These parts are aligned very carefully for good functioning. Unless there is a
good reason for it (replacing the rear lexan plastic panel).
-
When you are finished, you can replace the slide disk. When dropping it gently on the
axle, turning it a little, it should find the right slot.
-
Check that the advance mechanism works (not to fast).
-
Lock the slide disk with the big M14 nut.
-
Close the viewer with its front plate.