6
Safety Cut-Off
This appliance is fitted with a safety cut-off which will operate if
the heater overheats (e.g. Due to blocked air vents). For safety
reasons, the heater will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains
supply for at least 15 minutes. Reconnect the supply to the mains
and switch on the appliance.
Maintenance
Before cleaning or maintenance operation, switch off and unplug the
appliance. Ensure it is perfectly cooled.
To remove the dust, wipe the appliance with a cloth
Never use abrasives or detergents
Troubleshooting
No light from the fuel effect: Possibly a bulb failure. Replace the
bulb by a qualified electrician.
No heat or light: Check the wall socket by plugging in a known
working appliance. If socket is functional, and cord or plug is
suspected, have them checked by an electrician.
Light but no heat: Check that the Thermostat on the heater is set
above the ambient room temperature. Alternatively, the automatic
cut-off may have engaged - see Safety Cut-Off section.
Disposal
At the end of the product’s serviceable life it should be disposed
of thoughtfully and safely in accordance with local authority
regulations. The plug should be removed from the power supply
cord and the power cord cut from the heater
