4
Using your Heater
ASSEMBLY
:
• Remove the packaging and make sure that the appliance is intact.
• Assemble the body of the frame and the base plate together in the following
sequences:
1. Remove the screws from the lower part of the body frame.
2. Insert the power cord through the slot placed in the middle part of the base
and then assemble the body frame to the base plate.
3. Secure the body frame to the base plate by means of two screws
previously removed.
4. Insert the power cord through the suitable slots and then fix it by the clamp.
How to use:
1. Plug in the appliance. Check that the outlet has at least a 10-AMP current carrying
capacity.
2. Select the heating power needed by pressing the ON switches, one for 400w, two
for 800w and three for 1200w.
3. Press the oscillating switch to make the heater oscillate. Press it again to switch
off the oscillating movement of the appliance.
1. Body Frame
2. Base Plate
3. Screws (2 pcs)
4. Tip-over Safety Switch Rod
5. Power cord guide
6. Power cord
