De Nora Capital Controls CHLORALERT T17CA4000 Series Instruction Manual Download Page 2

325.6030.7 

- 2 -

These instructions describe the installation, operation and maintenance of the subject equipment. Failure to strictly  

follow these instructions can lead to an equipment rupture that may cause significant property damage, severe  

personal injury and even death. If you do not understand these instructions, please call De Nora Water Technologies 

for clarification before commencing any work at +1 215-997-4000 and ask for a Field Service Manager. De Nora Water 

Technologies, Inc. reserves the rights to make engineering refinements that may not be described herein. It is the 

responsibility of the installer to contact De Nora Water Technologies, Inc. for information that cannot be answered specifically 

by these instructions.

Any customer request to alter or reduce the design safeguards incorporated into De Nora Water Technologies 
equipment is conditioned on the customer absolving De Nora Water Technologies from any consequences of such a 
decision.

De Nora Water Technologies has developed the recommended installation, operating and maintenance procedures with 

careful attention to safety. In addition to instruction/operating manuals, all instructions given on labels or attached tags 

should be followed. Regardless of these efforts, it is not possible to eliminate all hazards from the equipment or foresee every 

possible hazard that may occur. It is the responsibility of the installer to ensure that the recommended installation instructions 

are followed. It is the responsibility of the user to ensure that the recommended operating and maintenance instructions are 

followed. De Nora Water Technologies, Inc. cannot be responsible deviations from the recommended instructions that may 

result in a hazardous or unsafe condition.

De Nora Water Technologies, Inc. cannot be responsible for the overall system design of which our equipment may be 

an integral part of or any unauthorized modifications to the equipment made by any party other that De Nora Water 

Technologies, Inc.

De Nora Water Technologies, Inc. takes all reasonable precautions in packaging the equipment to prevent shipping damage. 

Carefully inspect each item and report damages immediately to the shipping agent involved for equipment shipped “F.O.B. 

Colmar” or to De Nora Water Technologies for equipment shipped “F.O.B Jobsite”. Do not install damaged equipment.

De Nora Water Technologies, Colmar Operations 
Colmar, Pennsylvania, USA 
is ISO 9001: 2008 Certified

READ THE ENTIRE MANUAL BEFORE OPERATING

 

USE ONLY IN ACCORDANCE WITH INSTRUCTION MANUAL

    

 

WARNING: HAZARDOUS VOLTAGES

Summary of Contents for Capital Controls CHLORALERT T17CA4000 Series

















Reviews: