CONTROL PANEL
1 2 3 4 5 6 7 8
1. Pilot Light
The pilot indicates that the amp is powered
on. Use #47 replacement bulbs.
2. Off / Stdby / Play
This is a 3-position switch. The middle
position places the amplifier in Stand-by
mode. After 30 seconds, switch from
Standby to Play.
3. Vol 2
This model is equipped with the VarioDyne
power control. Vol 2 controls the overall
power output from <1W to 16W.
4. Vol 1
Controls the loudness of the amplifier in
conjuction with Vol 2. Turn up Vol 1 with
Vol 2 turned down for overdriven sounds
at lower sound levels.
5. Treble
Controls the amount of high frequecy
content.
6. Bass
Controls the amount of low frequency
content.
7. Boost
This model is wired for a mid-boost. Turn
the Boost knob counter clockwise to scoop
the mids. Turning the Boost clockwise will
result in a flatter mid-range response.
8. Input
Plug the guitar or output of your pedal
board in here. Use only high-quality
shielded instrument cable.
