Linear Movement Apparatus //
User´s manual
Linear Movement Apparatus //
User´s manual
38
37
// OPERATING
PROCEDURE
SELECTING TEST
WHAT DO YOU DO WHEN A
TEST ENDS?
TIME (T) will stop and the data will be saved
to the selected memory.
You can try the test again in the selected space
or choose another test space to make the test.
Finish a test.
When the subject releases the
(precision switch on slide)
the system
stops the test and you can see the results
on the control.
You can see the final distance and the final
time. You can also see the calculated speed.
After these steps you will be able to start a new test,
repeat the current test or finish the experiment.
Use a spreadsheet on your computer or a sheet
of paper and write down the results obtained in
the test.
You can also make use of the software that will allow you to
perform this process automatically and export the results to
a spreadsheet.
You can select another test within ten (10)
possible and perform new tests.
These will
be stored in each one of the
test in the
memory until the computer turns off.
You can reuse a test with saved result
and
do a new test on it;
This will delete the
results of the selected test.
For that reason
it is recommended to write
the results to a sheet of paper or a spreads-
heet.
D : 55.53 S : 0.015
T : 3696
TS : 2
D : 55.53 S : 0.015
T : 3696
TS : 2
D : 55.53 S : 0.015
T : 3696
TS : 2
