User Manual
Edge 1-000 series (9INB)
Edge_1000_9INB_UserManual_5DUINQ20_EN_v01-01.docx
Page 36 of 40
6.
Failures, Warnings and Error messages
Always check if a message is shown on the display. If no message is shown and the machine
does not work correctly, you still may find the possible cause and solution in the following
table.
For failures not mentioned in this manual, contact the service engineer.
Communication error
Consult the service engineer.
Door open
Close door or install the green service key to activate the machine.
Drip tray full / Waste bucket full
Empty the drip tray in front of machine.
Make sure the probes are dry.
See paragraph
Daily maintenance.
Enough water?
Open/connect the water supply and restart the machine.
If possible, check if problem also occurs when a hot water dispense is made.
Consult the service engineer and please mention results.
If problem persists consult the service engineer.
Filling boiler
Wait until boiler is filled.
If message is still shown after 10 minutes, consult the service engineer.
Install drip tray
Place the drip tray. See paragraph
Daily maintenance.
Install waste bucket
Place the waste bucket.
Insert coins
The machine is waiting for full payment.
Machine Blocked
The coffee machine is locked intentionally
Consult the service engineer.
Mixer blocked
Clean the mixing bowl.
See paragraph
Weekly maintenance
Not all ingredients available
One or more canisters must be refilled.
See paragraph
Fill the ingredient canisters.
No water connected / No water in boiler
No water detected for more than 2 minutes.
First check if the water supply is opened / connected.
Open the door of the coffee machine to display the service menu, wait 2 seconds and close
the door again to allow the coffee machine to re-activate itself.
If this does not help restart the coffee machine.
If problem persists consult the service engineer.
Summary of Contents for Edge 1-000 series
Page 1: ...Instant 1 000 User Manual Edge Coffee machine...
Page 40: ......
