85
8.3
How to get and load a permission key
Collecting coffee machine information:
1.
Open the front door of the machine.
2.
The service menu is shown on the
screen.
3.
Select “Software information” button on
the touchscreen.
4.
Software information screen is shown.
5.
Check if the correct software versions
are installed:
-
MoVeC ICEQ version :3.40 or higher
-
Version flash file
:1.7 or higher
-
DJD software ID
:4.0 or higher
6.
Within the software information screen,
locate the line: CM-X300
7.
Write down the entire CM-X300
serial number.
The number is 16 characters long and
case sensitive.
Note: If the CM-X300 serial number is
incorrect, the received permission key
will not work.
8.
Write also down the complete machine
serial number. This machine serial
number is 13 character long.
(The machine serial number can also be
found on the CE sticker inside the
machine)
Send the CM-X300 serial number and the coffee machine serial number to the
manufacturer. You need to receive back a key.mpf file from the manufacturer.
Summary of Contents for COEX 9CND SERIES
Page 92: ...92 Notes...
Page 93: ...93 Notes...
