75
Default screen saver
7.13
Images
Logo
= A customer specific logo,
visible in the user screen.
Standby
= an image, visible while the
machine is not used. Also called
screensaver.
Distributing = an image, shown during
dispense of a consumption.
Images needs to have the following file
format:
.png
.jpg
.gif
Wide x height
-
Logo:
175 x 60 pixels (landscape)
-
Standby:
640 x 480 pixels (landscape)
-
Distributing: 600 x 350 pixels (landscape)
The maximum number of loaded images depends on the file size of the images
and the available flash memory inside the machine.
The images need to have the correct pixel size for the best result.
Please note that the machine does not auto scale the images.
Possibilities:
-
Load user logo.
A user logo (or several user logo’s) can
be loaded via an USB stick or via
“connect me”.
-
Select active user logo
A logo can be selected, if more then 1
logo is available in the system memory.
The logo in grey is active.
Only 1 logo can be shown at the same
time.
-
Delete user logo
Delete a logo from the system memory.
-
Screen saver time
See chapter 7.11 for explanation.
-
Load standby image(s)
The files can be loaded via a USB stick or via
“connect me”.
-
Select active standby images
An image can be selected, if more then 1 is
available. More then one image can be selected.
-
Set delay standby images.
The delay
between
the consecutive images can be set in seconds.
Summary of Contents for COEX 9CND SERIES
Page 92: ...92 Notes...
Page 93: ...93 Notes...
