3
4
5
6
7
8
3
Wrap some tissue paper
around the middle of one of the
steering tie rods. Hold the rod
with pliers, as shown, and screw a
ball end onto each end. Then
repeat the process for the second
steering tie rod.
4
Both steering tie rods must be
the same length – about 66mm –
when assembled. Measure the
length using a caliper gauge.
5
Now you will need the two
remaining ball ends and the rear
suspension tie rod.
6
Screw the two ball ends onto
the rod.
7
Adjust the distance between
the ball ends to about 2.5mm.
8
Store the three assembled
tie rods, along with the unused
ball-headed screws, until they
are needed.
117
118
117
