Pure Hardware Video Wall Controller DDW-VPHXXXX
15
/
44
Shenzhen DDW Technology Co.,Ltd
Homepage:
http://www.ddw.net
Alibaba:
http://ddw.en.alibaba.com
Global hotline: 400 852 822 Tel: 86-755-61825858 Fax: 86-755-23325820
ADD: F/4 Linquan building,#8 industrial park, #1 Donghuan road,Longhua, Bao'an, Shenzhen,China,518109
Outer Memory of Preset is to save all kinds of parameter of each into controlling computer. When using, open the
outer memory of preset through control software and synchronize to video wall processor. It may need to
re-adjust vide
o wall parameter when we recall “Outer Memory of Preset” mode.
The differences between “Inner Memory of Preset” and “Outer Memory of Preset” is, all kinds of parameters in the
mode of “the inner scene” directly saved in controlling PC, which could be recalled through system control
software and remote control. While all kinds of parameters in the mode of “Outer Memory of Preset” saved in
controlling computer. Here will not specify the operation procedure of “Outer Memory of Preset” mode, “the outer
scene” preset function will be closed when delivery unless there is specific requirements.
4.4.1 Memory of preset save
Save current window location and selected signal by click key combination " Ctrl "+ "number" , as shown in the
figure below,
Figure 4.7 Memory of preset save and recall
If a button has saved a memory of preset (For example :Mode 1) , it will pop up a dialog box when you save this
mode again, as shown in the figure below:
Figure 4.18 Prompt of mode save
Click "
是
" to replace the original scene mode and click "
否
" represents not to make any response.
4.4.2 Memory of preset recall
Click the number button of saved memory of preset, it will recall the window position, size and input signal of the
mode. If the corresponding number button does not save any memory of preset, it will pop up a warning dialog
box, as shown in the figure below:
