Pure Hardware Video Wall Controller DDW-VPHXXXX
9
/
44
Shenzhen DDW Technology Co.,Ltd
Homepage:
http://www.ddw.net
Alibaba:
http://ddw.en.alibaba.com
Global hotline: 400 852 822 Tel: 86-755-61825858 Fax: 86-755-23325820
ADD: F/4 Linquan building,#8 industrial park, #1 Donghuan road,Longhua, Bao'an, Shenzhen,China,518109
Figure 3.2 Front panel diagram
①
Power indicator: : There are two groups corresponding to two power supply.
Each group has two light AC and DC. When power cord 1 connected, AC1 light. When switch on the power
switcher, DC1 light. It’s the same as power cord 2.
②
LCD display panel: Display the information of working condition, menu and operation settings.
③
Equipment working indicator: When normal working, “power” lights on, “Active” blinks; When in the
control of the equipment, "CONTROL" blinks; IR is a infrared receiver.
Figure 3.3 working indicator and infrared receiver
④
Front buttons, as follows:
【
1,
2……9
】
----
Number buttons, to select the input and output channels.
【
MODE
】
----
Mode switching buttons, to select the switching mode for in&out channels.
【
SAVE
】
----
Save buttons, to save the current displaying model to memory of preset.
【
LOAD
】
----
Recall buttons, to recall the saved memory of preset.
【
MENU
】
----
Menu buttons, to set the machine code, baud rate and buzz switcher, check the
information of inner switching hub.
【
ESC
】
----
Exit button, to exit current menu.
【
ENTER
】
---
Enter button, to confirm and take the switching into effect.
For an example,
If switching input 1 to output 2, users should press these buttons:1---MODE---2---ENTER
；
If switching input 1 to all output, users should press these buttons in order: 1---MODE
—0----ENTER
。
3.3 Rear panel
①
②
③
④
