9
2.
Then rotate the function dial to a level higher than 2 (otherwise the light emitted will be
too weak to notice) and press the static button on the remote transmitter to trigger a
static stimulus on the receiver collar. If the static stimulus function is working properly,
the test light will start flashing.
Press
9.
Fitting and Powering On the Collar
The receiver collar should be fitted snuggly across the top of the dog’s neck (as opposed to
hanging it loosely at the bottom of the neck), yet loose enough to allow the user to slide one
finger inside the strap. The collar casing should be positioned at the front and center of the
neck and not rotated to either side. Both of the metal probes underneath the collar unit
should be in good contact with the skin as shown below. For dogs with thick coats, it may be
necessary to trim the hair underneath the collar unit to ensure that the probes are in good
contact with the skin. Once the collar unit has been fitted, trim down the excess strap to a
suitable length, if required.
Sound Activated Sensor
On/Off
Button
Indicator Light (Red/Green)
